Sudo cp /etc/init.d/skeleton /etc/init.d/cgminerĭAEMON_ARGS=”-o -u your_user -p your_password -o –real-quiet –syslog –text-only”Īnd make sure start-stop-daemon backgrounds the process. Sudo adduser –system –home /var /local/lib/cgminer cgminer Run cgminer under its own user “cgminer”: Sudo cp /usr/src/cgminer/les /etc/udev/rules.d/
#Cgminer command line install#
To run cgminer as a regular user you should also install the udev rules: Libusb-1.0-0-dev is already the newest version.Ġ upgraded, 0 newly installed, 0 to remove and 1 not upgraded. If you lock the core clock, it will only draw as much power needed to reach the desired core clock.
bat file you use (with the desired core clock speed - 1075-1150 work well for a RTX 3070) It differs from your current clock as in it is dynamic and adjusted to hit the power limit you set. Libusb-1.0-0 is already the newest version. Just add this parameters to the command in the. Note, selecting ‘libusb-1.0-0-dev’ for regex ‘libusb-1.0’ Note, selecting ‘libusb-1.0-0’ for regex ‘libusb-1.0’ :/home/pi/workarea/cgminer# sudo apt-get install libusb-1.0 :/home/pi/workarea/cgminer# sudo apt-get install libusb configure: line 11925: -pthread: command not foundĬonfigure: error: “udev support requested but libudev not installed”Ĭonfigure: error. The stream ends with:Ĭhecking whether gcc and cc understand -c and -o together… yes I fixed the -Wall switch and retried the command. | #define PACKAGE_BUGREPORT “ ”Ĭonfigure:3939: error: in `/home/pi/workarea/cgminer’:Ĭonfigure:3941: error: C compiler cannot create executablesĪny ideas? Be gentle, I am new to all this… Gcc: error: unrecognized option ‘-qversion’Ĭonfigure:3870: checking whether the C compiler worksĬonfigure:3892: gcc -O2 -WAll -march=native conftest.c >&5Ĭc1: error: bad value (native) for -march switchĬc1: error: unrecognized command line option ‘-WAll’ When I look at config.log, I see the following: configure –enable-bflscĬhecking build system type… armv6l-unknown-linux-gnueabihfĬhecking host system type… armv6l-unknown-linux-gnueabihfĬhecking target system type… armv6l-unknown-linux-gnueabihfĬhecking for a BSD-compatible install… /usr/bin/install -cĬhecking whether build environment is sane… yesĬhecking for a thread-safe mkdir -p… /bin/mkdir -pĬhecking whether make supports nested variables… yesĬhecking for style of include used by make… GNUĬhecking whether the C compiler works… noĬonfigure: error: in `/home/pi/workarea/cgminer’:Ĭonfigure: error: C compiler cannot create executables :/home/pi/workarea/cgminer# CFLAGS=”-O2 -WAll -march=native”. And a 6950 might be good at 870, but I'm assuming a 7950 could go a little higher than that.This sequence doesn’t compile on my RPi.
I've also had issues where not specifying an intensity sometimes acts wonky, so I always add it in.Īlso, the 6950 can only go 125MHz below the core clock, but the 7950 can go 150MHz below the core clock. Also, on my 7970, it defaults to -I 6, which works, but i think -I 7 works better. In that case, you can get rid of the -d command altogether.
#Cgminer command line password#
Start /D "C:\cgmine" cgminer.exe -o :8332 -u username -p password -o :8332 -u username -p password -temp-target 85 -auto-fan -temp-overheat 90 -gpu-engine 870 -gpu-memclock 300 -gpu-memdiff -125Īh ok, I didn't realize the two towers were in two separate computes. It's weird that you say it can't manage my memory clock but I just checked trixx and it's set to 300. I watch them all the time but I want my gpu to have priority while doing so. I use educational videos on youtube to help me understand subjects in college. I just basically want to watch youtube and not loose hundreds of megahashes while doing so. I hate to correct you but from what I understand cgminer by default has a intensity of 7 set by default. I added -gpu-memdiff -125 to my command list. So You're suggesting I get rid of the -d command? I'll set bitminter as the primary.
0 kommentar(er)
